H3C S12500 Installation Manual page 94

# Display the main parameters of the transceiver plugged in interface GigabitEthernet 3/0/19.
<Sysname> display transceiver interface gigabitethernet 3/0/19
GigabitEthernet3/0/19 transceiver information:
Transceiver Type
Connector Type
Wavelength(nm)
Transfer Distance(m)
Digital Diagnostic Monitoring : YES
Vendor Name
Ordering Name
Table 23 display transceiver command output description
Field
transceiver information
Transceiver Type
Connector Type
Wavelength(nm)
Transfer distance(xx)
Digital Diagnostic
Monitoring
Vendor Name
Ordering Name
# Display the electrical label information of the H3C-customized transceiver plugged in interface
GigabitEthernet 3/0/19.
<Sysname> display transceiver manuinfo interface Gigabitethernet 3/0/19
GigabitEthernet3/0/19 transceiver manufacture information:
: 1000_BASE_SX_SFP
: LC
: 850
: 550(50um),270(62.5um)
: H3C
: SFP-GE-SX-MM850
Description
Transceiver information
Transceiver type
Type of the connectors of the transceiver:
•
Optical connectors, including SC (SC connector, developed by NTT) and LC
(LC connector, 1.25 mm/RJ-45 optical connector developed by Lucent).
•
Other connectors, including RJ-45 and CX 4.
•
Optical transceiver: Central wavelength of the laser sent, in nm. If the
transceiver, for example, 10GBASE-LX4, supports multiple wavelengths, every
two wavelength values are separated by a comma.
•
Electrical transceiver: Displayed as N/A.
Transfer distance, where xx represents km for single-mode transceivers and m for
other transceivers. If the transceiver supports multiple transfer medium, every two
values of the transfer distance are separated by a comma. The corresponding
transfer medium is included in the bracket following the transfer distance value.
The following are the transfer media:
•
9 um: 9/125 um single-mode fiber
•
50 um: 50/125 um multi-mode fiber
•
62.5 um: 62.5/125 um multi-mode fiber
•
TP: Twisted pair
•
CX4: CX4 cable
Whether the digital diagnosis function is supported, where:
•
YES: Supported
•
NO: Not supported
Vendor name or name of the vendor who customizes the transceiver:
•
H3C-customized transceiver: H3C is displayed.
•
Other transceivers: The vendor name is displayed; if the vendor is unknown or
illegal, unknown is displayed.
•
H3C devices: Device model is displayed.
•
Other devices: N/A is displayed.
84