Bosch VIP X1 Installation And Operating Manual page 71

VIP X1/VIP X2 | Installation and Operating Manual
Alarm e-mail
As an alternative to automatic connecting, alarm states can also be documented
by e-mail. In this way it is possible to notify a recipient who does not have a video
receiver. In this case the VIP X automatically sends an e-mail to a previously
defined e-mail address.
Send alarm e-mail:
Select On if you want the VIP X to automatically send an alarm e-mail in the
event of an alarm.
Mail server IP address:
Enter the IP address of a mail server that operates on the SMTP standard
(Simple Mail Transfer Protocol). Outgoing e-mails will be sent to the mail server
via the address you entered. Otherwise the box can be left blank (0.0.0.0).
Layout:
You can specify the data format in which the alarm message will be sent.
Standard: e-mail with JPEG image file attachment.
SMS: e-mail in SMS format to an e-mail-to-SMS gateway (for example to give
an alarm by cellphone) without an image attachment.
Warning!
When a cellphone is used as the receiver, make sure to activate the e-mail
or SMS function, depending on the format, so that these messages can be
received. You can obtain information on operating your cellphone from
your cellphone provider.
Bosch Security Systems | 2005-10 | V1.5
EN | 71
Configuration using a Web Browser