Bosch VIP X1 Installation And Operating Manual page 70

EN | 70
This option allows you to counteract, independently of motion alarms, manipu-
lation of the orientation or location of a camera resulting from turning the camera
mounting bracket, for instance.
Scene too bright
Activate this function if tampering associated with exposure to extreme light (for
instance, shining a flashlight directly on the objective) should trigger an alarm.
The average brightness of the scene provides a basis for recognition.
Scene too dark
Activate this function if tampering associated with covering the objective (for
instance, by spraying paint on it) should trigger an alarm. The average bright-
ness of the scene provides a basis for recognition.
Scene too noisy
Activate this function if tampering associated with EMR interference (noisy
scene as the result of a strong interference signal in the vicinity of the video
lines) should trigger an alarm.
Selecting the area
The areas of the image to be monitored by the video sensor can be selected.
The video image is subdivided into 858 square sensor fields. Each of these
fields can be activated or deactivated individually. If it is necessary to exclude
particular regions of the camera's field of view from monitoring due to continuous
movement (by a tree in the wind, etc.), the relevant fields can be deactivated.
– Click Select area to configure the sensor fields. A new window will open.
– If necessary, click Clear all first to clear the current selection (fields marked
red).
– Left-click the fields to be activated. Activated fields are marked red.
– Click Select all to select the entire video frame for monitoring.
– Right-click any fields you wish to deactivate. "Inactive" fields are marked
white.
– Click OK to save the configuration.
– Click the close button (X) in the window title bar to close the window without
saving the changes.
Configuration using a Web Browser
Installation and Operating Manual | VIP X1/VIP X2
Bosch Security Systems | 2005-10 | V1.5