Bosch VIP X1 Installation And Operating Manual page 50

EN | 50
Password
A VIP X is generally protected by a password to prevent unauthorized access to
the unit. You can use various authorization levels (User name:) to limit access.
Note
Proper password protection is only guaranteed if all higher authorization
levels are also protected with a password. For example, if a live password
is assigned, a service and a user password should also be set. When
assigning passwords, you should always start from the highest
authorization level.
User name:
The VIP X recognizes three user names: service, user and live, which
correspond to different authorization levels.
The user name service represents the highest authorisation level. After entering
the corresponding password, you can use it to access all the functions of the
VIP X and change all configuration settings.
The user name user represents the middle authorisation level. You can use it to
operate the unit and also to control cameras, but you cannot change the
configuration.
The user name live represents the lowest authorization level. It can only be used
to view the live video image and switch between the different live image
displays.
Password:
You can define and change a separate password for each user name if you are
logged on as service or if the unit is not protected by a password.
Enter the password for the selected user name here.
Configuration using a Web Browser
Installation and Operating Manual | VIP X1/VIP X2
Bosch Security Systems | 2005-10 | V1.5