Bosch VIP X1 Installation And Operating Manual page 63

VIP X1/VIP X2 | Installation and Operating Manual
Increment: A number from 000 to 255 is attached to the filename. This
automatically increases by 1 every time a new file is created. When 255 is
reached the numbers begin again at 000.
Date/time suffix: A date and time code are automatically incorporated into
the file name. When choosing this setting take care that the device's date and
time are set correctly. Example: the file snap011005_114530.jpg was saved
on October 1st, 2005, at 11.45 and 30 seconds.
JPEG posting interval:
Enter the time interval here at which the single images are to be sent to an FTP
server. Enter zero, if no single images are to be sent.
FTP server IP address:
Enter here the IP address of the FTP server on which the JPEG-images are to
be stored.
FTP login name:
Enter your login name for the FTP server here.
FTP password:
Enter the password for the access to the FTP server here.
Path on FTP server:
Enter the exact path here under which the images are to be stored on the FTP
server.
Post JPEG from camera: (VIP X2 only)
Click the check box to enable the camera input for the JPEG image. An enabled
camera input is indicated by a check mark.
Bosch Security Systems | 2005-10 | V1.5
EN | 63
Configuration using a Web Browser