Chapter 4 Installation - Bosch VIP X1 Installation And Operating Manual

VIP X1/VIP X2 | Installation and Operating Manual
Installation
Thanks to its ultra-compact dimensions, the VIP X is particularly well suited for
installation in cabinets.
Warning!
The unit is intended for use indoors or in protected spaces. Select a
suitable location for installation where the unit will not be subjected to
conditions of extreme temperature or humidity. The ambient temperature
must be between 0 and + 50 C (VIP X1) or between 0 and +40 C (VIP X2),
relative humidity may not exceed 80 %.
The unit generates heat during operation. Ensure that there is adequate
ventilation and also that there is enough clearance between the unit and
heat-sensitive objects or equipment.
Please ensure the following conditions for installation:
Do not mount the unit close to heaters or other heat sources. Avoid locations
subject to direct sunlight.
Allow sufficient space for running cables.
Ensure that the unit has adequate ventilation.
Use only the cables supplied for connections or appropriate cables resistant
to electromagnetic interference.
Position and run all cables so that they are protected from damage, and
provide strain relief where needed.
Avoid shocks, bashes and strong vibrations as they might destroy the unit.
Bosch Security Systems | 2005-10 | V1.5
EN | 17
4
Installation