Direct-To Navigation; Create A Direct-To Course From The Map; Figure 2-52: Turn Anticipation - BENDIXKing AV8OR ACE User Manual

The required bank angle to follow the arc will normally be between 3°
and 25° depending on the aircraft speed and the amount of course
change.

DIRECT-TO NAVIGATION

Direct-To Navigation lets the user set a course line from his current
position to any other position. Direct-To Navigation can be done with
the methods that follow:
•

Create a Direct-To course from the Map.

•
Create a Direct-To course from the keyboard entry.
•
Re-center the aircraft when Direct-To is already enabled
•
Bypass a WPT with a flight plan active
•
Enter a new WPT with a flight plan active.
Create a Direct-To course from the Map
Pan and zoom in/out on the map to find any point you want to set a
course to. If you tap on an existing NAVAID, more detail information
about the NAVAID point is shown by tapping the MORE INFO soft
D200904000003
Rev 3 Mar 2012
© Honeywell International Inc. Do not copy without express permission of Honeywell
Honeywell Bendix/King AV8OR Ace User's Guide

Figure 2-52: Turn Anticipation

Aviation Mode Operation
Page 2-59