Table of Contents
Advertisement
Honeywell Bendix/King AV8OR Ace User's Guide
WxWorx XM Weather Receiver Serial Setup
To configure the AV8OR ACE to receive weather data from the
WxWorx XM Weather Receiver, perform the following steps:
Attach the cable from the WxWorx XM Weather Receiver (supplied
with the WX XM Weather Receiver) to the USB port on the AV8OR.
From the Aviation Main Menu, tap the
System Setup Menu.
Highlight the Device Setup option and tap the SELECT soft key to
show the Device and Port Setup page.
•
Decide whether to use the "COM 1" or "COM 2" serial port.
•
Make sure that the serial port you decide to use is not in use
by any other port on the Device Setup Page. If the serial port
is in use, the Port field that shows it must be changed to
another setting.
•
Set the Weather Port to "COM 1" or "COM 2".
•
Set the Weather Type to "WxWorx". When finished the
Device and Port Setup page should look like the setup
options shown in the figure below.
Figure 6-5: WxWorx XM Weather Setup
Refer to the WxWorx user guide for how to activate your subscription
to XM weather.
Appendix
Page 6-14
©
Honeywell International Inc. Do not copy without express permission of Honeywell
soft key to open the
D200904000003
Rev 3 Mar 2012
Advertisement
Table of Contents
