Table of Contents
Advertisement
you will automatically be taken to the Edit Route screen where you
can determine the position of the intermediate route point. When you
enter the screen, the new via point is placed as the last via point
before the final destination. The new point is the selected point in the
list.
You have the following options:
Soft Key
Every time a new point is added, the route is recalculated
automatically, and you can start navigating right away.
Creating a Multi-point Route (Append a New
Destination)
Multi-point routes are created from simple routes, so a route must be
active first. One of the ways of expanding the route is to add a new
destination. The previous destination becomes the last via point of
the route.
This feature is available in Advanced mode only.
1. Select a new location as you did in the previous sections. This
D200904000003
Rev 3 Mar 2012
©
Honeywell International Inc. Do not copy without express permission of Honeywell
Honeywell Bendix/King AV8OR Ace User's Guide
Action
The selected point moves up in the list (becomes a
via point to be reached earlier). Tap this soft Key
repeatedly, and the point becomes the start point of
the route.
The selected point moves down in the list
(becomes a via point to be reached later). Tap this
soft Key repeatedly, and the point becomes the
final destination of the route.
The route is reversed. The start point becomes the
destination, the destination becomes the start point,
and all via points are to be reached in the opposite
order than before.
The route is optimized. The start point and the
destination remain at their position, but the via
points are reordered to make the shortest possible
route.
The selected point is removed from the route. The
route remains as it was before adding the new
point.
Automotive Mode Operation
Page 3-55
Advertisement
Table of Contents
