Direct-To Navigation; Create A Direct-To Course From The Map - BENDIXKing AV80R User Manual

AV8OR User's Guide
VFR Moving Map Function
The required bank angle to follow the arc will normally be between 3°
and 25° depending on the aircraft speed and the amount of course
change.

DIRECT-TO Navigation

Direct-To Navigation lets the user set a course line from his current
position to any other position. Direct-To Navigation can be done with
the methods that follow:
•

Create a Direct-To course from the Map.

•
Create a Direct-To course from the keyboard entry.
•
Re-center the aircraft when Direct-To is already enabled
•
Bypass a WPT with a flight plan active
•
Enter a new WPT with a flight plan active.
Create a Direct-To course from the Map
Pan and zoom in/out on the map to find the NAVAID point you want
to set a course to. Tap on the NAVAID point to show its name, more
detail information about the NAVAID point is shown by tapping the
MORE INFO soft key, as shown in Figure 3-40.
Pub. No D200803000008
© Honeywell International Inc. Do not copy without express permission of
Figure 3-39: Turn Anticipation
Page 3-35
Honeywell.
Aviation Mode Operation
Rev 2 Dec 2008.