Creating A Multi-Point Route (Inserting A Via Point) - BENDIXKing AV8OR ACE User Manual

Honeywell Bendix/King AV8OR Ace User's Guide
1. Tap the following soft Keys:
2. [optional] Tap
the displayed coordinates.
3. Tap the latitude or longitude value to change the coordinate.
4. Enter the coordinate values in WGS84 format on the keyboard:
the latitude (N or S) and the longitude (E or W).
5. Tap
6. The map appears with the selected point in the middle. Tap
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.

Creating a Multi-point Route (Inserting a Via Point)

Multi-point routes are created from simple routes, so a route must be
active first. One of the ways of expanding the route is to keep the
destination, and to add via points (intermediate destinations).
This feature is available in Advanced mode only.
1. Select a new location as you did in the previous sections. This
will be the additional destination in the route.
2. The map appears with the selected point in the middle, and the
Cursor menu opens automatically.
3. Tap
intermediate destination preceding the final destination of the
route.
4. [optional] To add more points to the route, repeat the above
steps as many times as you like.
If you insert a via point in a route that is already a multi-point route,
Automotive Mode Operation
Page 3-54
© Honeywell International Inc. Do not copy without express permission of Honeywell
(Simple mode)
to change the format of
or
to add the point as an
D200904000003
Rev 3 Mar 2012