Table of Contents
Advertisement
Figure 2-187: System Setup – Setting values
Tap the SAVE & EXIT soft key to save any changes. Tap the
RESET VALUES soft key to restore most of the values in the
General System Setup Options tables to their factory initial settings.
The values that not reset are: Aircraft Type and Min Runway length.
The following are the general system setup options and their
possible values.
• Aircraft Type: Select the appropriate host aircraft type: Fixed
Wing or Rotary Wing. This determines the aircraft symbol
that is used in VFR Moving Map mode.
• Auto-Hide Keys on Map Page: When this option is turned
ON and a value in seconds is set, all the soft keys on the VFR
Moving Map page are automatically removed after the set
time delay. Touching on the screen makes the soft keys
visible again. If the option is set to OFF the soft keys are
always visible.
• Flight Logging Rate: Sets the interval in seconds that the
system logs position data and loads it into a memory. The
interval can be set between 1 and 99 seconds. If "0" is set as
the interval, flight logging is disabled.
• Position Coordinate System: Sets the coordinate system to
be used for the display and entry of position information. The
available options are:
D200904000003
Rev 3 Mar 2012
©
Honeywell International Inc. Do not copy without express permission of Honeywell
Honeywell Bendix/King AV8OR Ace User's Guide
Aviation Mode Operation
Page 2-183
Advertisement
Table of Contents
