1. Lift the trim door up
and out of the unit.
2. Remove the wing
nuts, glass clips, and
the glass door from
the unit.
CAUTION
1. Place the ember
material onto the top
of the burner.
CAUTION
CAUTION
41
Figure 38. Glass Assembly
HAND TIGHTEN THE WING NUTS, BUT BE
CAREFUL NOT TO OVERTIGHTEN.
Figure 39. Placement of the Ember Material
DO NOT PLACE EMBERS DIRECTLY OVER
BURNER PORTS.
IT IS STRONGLY RECOMMENDED THAT TRIM
DOORS WITH OPTIONAL MESH SCREENS BE
INSTALLED ON PROPANE MODELS.