Using Phone Settings; Customizing Rings And Message Indicators - Cisco 7960G Phone Manual

Using Phone Settings

You can personalize your Cisco Unified IP Phone by adjusting the ring tone, phone screen, and other
settings.

Customizing Rings and Message Indicators

You can customize how your phone indicates an incoming call and a new voice mail message. You can
also adjust the ringer volume for your phone.
If you want to...
Change the ring tone per
line
Change the ring pattern per
line (flash-only, ring once,
beep-only, etc.)
Adjust the volume level for
the phone ringer
Change the way that the
voice message light on your
handset works
Tips
• Before you can access the "Change the Ring settings..." item from the User Options web pages,
your system administrator might need to enable this option for your phone.
• Typically, the default system policy for the voice message light on your handset tells your phone
to always light to indicate a new voice message.
Cisco Unified IP Phone 7960G and 7940G Guide for Cisco Unified CallManager 4.2(3)
Then...
1. Choose > Ring Type.
2. Choose a phone line or the default ring setting.
3. Choose a ring tone to play a sample of it.
4. Press Select and OK to set the ring tone, or press Cancel.
1. Log in to your User Options web pages. (See
Options Web Pages, page
2. Choose Change the Ring Settings for your phone (if available.)
Press while the handset is in the cradle and the headset
and speakerphone buttons are off. The new ringer volume is saved
automatically.
1. Log in to your User Options web pages. (See
Options Web Pages, page
2. Choose Change the Message Waiting Lamp policy...
Logging In to the User
51.)
Logging In to the User
51.)
Using Phone Settings
45