Using Cisco Extension Mobility - Cisco 7960G Phone Manual

If you...
Want to accept a higher-priority call
Hear a continuous tone interrupting
your call
Tips
• When you make or receive an MLPP-enabled call, you will hear special ring tones and call waiting
tones that differ from the standard tones.
• If you enter an invalid MLPP access number, a verbal announcement will alert you of the error.
• An MLPP-enabled call retains its priority and preemptive status when you:
Put the call on hold
–
Transfer the call
–
Add the call to a three-way conference
–
Answer the call using PickUp
–

Using Cisco Extension Mobility

Cisco Extension Mobility (EM) allows you to temporarily configure a Cisco Unified IP Phone as your
own. Once you log in to EM, the phone adopts your user profile, including your phone lines, features,
established services, and web-based settings. Your system administrator must configure EM for you.
If you want to... Then...
Log in to EM 1. Choose
2. Enter your user ID and PIN (provided by your system administrator).
3. If prompted, select a device profile.
Log out of EM 1. Choose
2. When prompted to log out, press Yes.
Tips
• EM automatically logs you out after a certain amount of time. This time limit is established by
your system administrator.
• Changes that you make to your EM profile (from the User Options web pages) take effect the next
time that you log in to EM on a phone.
• Settings that are controlled on the phone only are not maintained in your EM profile.
Cisco Unified IP Phone 7960G and 7940G Guide for Cisco Unified CallManager 4.2(3)
Then...
Answer the call as usual. If necessary, end an active call first.
You or the other party are receiving a call that must preempt
the current call. Hang up immediately to allow the higher
priority call to ring through.
> EM Service (name can vary).
> EM Service (name can vary).
Advanced Call Handling
41