Additional Information - Siemens SIMATIC S7-200 System Manual

S7-200 Programmable Controller System Manual
Configuration
You can use the STEP 7--Micro/WIN Internet Wizard to configure the (CP 243--1 IT) Internet
module to connect an S7-200 PLC to an Ethernet/Internet network. The (CP 243--1 IT) Internet
module has additional web server functionality that can be configured with the Internet Wizard. To
Internet start the Internet Wizard, select the Tools > Internet Wizard menu command.
Connections
The (CP 243--1 IT) Internet module has the
following connections. The connections are
located under the covers of the front doors.
Terminal block for 24 VDC supply
-
voltage and ground connection
8-in RJ45 socket for Ethernet
-
connection
Plug connector for I/O bus
-
Integrated ribbon cable with socket for
-
I/O bus

Additional Information

For more information about the (CP 243--1 IT) Internet module, refer to the
SIMATIC NET CP 243- -1 IT Communications Processor for Industrial Ethernet and Information
Technology Technical Manual.
462
Integrated
ribbon cable
with socket
for I/O bus
8-pin RJ45 socket for
Ethernet connection
Figure A-41 Connecting the (CP 243- -1 IT) Internet
Module
Connector
for I/O bus
Terminal block for 24
VDC supply voltage
and ground connection