General Technical Specifications - Siemens SIMATIC S7-200 System Manual

S7-200 Programmable Controller System Manual

General Technical Specifications

Standards Compliance
The national and international standards listed below were used to determine appropriate
performance specifications and testing for the S7-200 family of products. Table A-1 defines the
specific adherence to these standards.
European Community (CE) Low Voltage Directive 73/23/EEC
-
EN 61131--2:2003 Programmable controllers -- Equipment requirements
European Community (CE) EMC Directive 89/336/EEC
-
Electromagnetic emission standard
EN 61000--6--3:2001 residential, commercial, and light industry
EN 61000--6--4:2001 industrial environment
Electromagnetic immunity standards
EN 61000--6--2:2001 industrial environment
European Community ATEX Directive 94/9/EC
-
EN 60079--15 Type of protection 'n'
ATEX Directive applies to CPUs and expansion modules with a rated voltage of 24 VDC. It
does not apply to modules with AC power systems or Relay outputs.
After July 2009, the following applies:
EC Directive 2006/95EC (Low Voltage Directive) "Electrical Equipment Designed for Use
-
within Certain Voltage Limits"
EN 61131--2:2007 Programmable controllers -- Equipment requirements and tests
EC Directive 2004/108/EC (EMC Directive) "Electromagnetic Compatibility"
-
EN 61000--6--4:2007: Industrial Environment
EN 61131--2:2007: Programmable controllers -- Equipment requirements and tests
EC Directive 94/9/EC (ATEX) "Equipment and Protective Systems Intending for Use in
-
Potential Explosive Atmospheres"
EN 60079--15:2005 Type of protection 'n'
The CE Declaration of Conformity is held on file available to competent authorities at:
Siemens AG
IA AS RD ST PLC Amberg
Werner--von--Siemens--Str. 50
D92224 Amberg
Germany
Underwriters Laboratories, Inc.: UL 508 Listed (Industrial Control Equipment),
-
Registration number E75310
Canadian Standards Association: CSA C22.2 Number 142 (Process Control Equipment)
-
Factory Mutual Research: Class Number 3600, Class Number 3611, FM Class I, Division 2,
-
Groups A, B, C, & D Hazardous Locations, T4A and Class I, Zone 2, IIC, T4.
Tip
The SIMATIC S7-200 series meets the CSA standard.
The cULus logo indicates that the S7-200 has been examined and certified by Underwriters
Laboratories (UL) to standards UL 508 and CSA 22.2 No. 142.
392