Table of Contents
Advertisement
Customer
Se_i_a
__
240EdwardsStreet,SE
C[eveiand. Tennessee 37311
Tel:423-472-3333
Fax:423-478-6710
G.F.I.
If the electric dryer is protected by a GROUND FAULT INTERRUPTER, follow the pro-
cedure for a 4-wire hookup below.
4-WIRE RECEPTACLE
The frame of a 120/240 Volt machine must NOT be connected to neutral terminals. It
MUST be connected to the 4th wire (green of the power supply) or to the metallic covering
of a three-wire supply.
Four Wh'l ReCeplacle
If a 4-wire receptacle of NEMA type is used, a matching UL Listed power supply cord (pig-
tail) must be used. This cord contains four NO. 10 copper conductors with spade or ring
terminals on the dryer end. The 4th (grounding) conductor must be identified by a green
cover and the neutral conductor by a white cover. The cord should have a suitable strain
relief and should be a minimum of 4 feet long. The poser supply cord and strain relief are
not provided with the dryer.
MA_TAG
Admiral
_J
:'mnmJENN-A.II::I
_'J)L3cJi¢
C:"_ef
Hide quick links:
Advertisement
Table of Contents
