Maytag STACKED WASHER- DRYER Installation Instructions Manual page 21

CusiemerService ,,,l__
240 Edwards Street, SE
C]eve/and, Tennessee 37311
Tel:423-472-3333
Fax:_23-478-6710
INSTALL FILL HOSES
Insert plain hose washers in 90 degree end of fill hoses and screen washers in straight end of
hoses. The screens should point outward.
The valve inlets are marked "H" and "C" to denote the hot inlet (top) and cold inlet (lower).
Connect 90 degree ends of hoses to the valve. Connect lower hose first. Be sure that hose
connectors are not cross threaded on the valve. Tighten securely by hand plus 1/4 turn with
pliers. Do no overtighten as this can strip the threads on the valve.
Connect the straight ends of the hose to the corresponding supply faucets (hot and cold).
_]
MA_rA6 Admiral [J mJENN-AIR "_'Ma(jJ¢ Chef