Machine Controls And Features - Alto Vision 17 Operator's Manual

MACHINE CONTROLS and FEATURES

Brush Switch. See Figure 2.
The brush switch is to the left of the vacuum
switch on the control panel. To start the brush
motor, press the top of the switch. To stop the
brush motor, press the bottom of the switch.
Vacuum Switch. See Figure 3.
The vacuum switch is to the left of the solution
control knob. To start the vacuum motor, press
the top of the switch. To stop the vacuum motor,
press the bottom of the switch.
Solution Control Knob. See Figure 4.
The solution control knob is in the middle of the
control panel. For more solution, turn the knob
to the right. For less solution, turn the knob to
the left.
Circuit Breaker.
Electric Model
Brush Motor Circuit breaker only.
(located on control panel)
Page -8-
Brush Vacuum
Figure #2
Brush Vacuum
Figure #3
Brush Vacuum
Figure #4
CLARKE TECHNOLOGY Operator's Manual -Vision 17E 115V
Solution
Solution
Solution