How To Install The Squeegee - Alto Vision 17 Operator's Manual

MACHINE CONTROLS and FEATURES (cont'd)
Machine Control Handle. See Figure 8.
The machine control handle (a) is located on the
back side of the machine. The handle is adjustable
for operator comfort and ease. The handle adjust-
ment knobs are located at the base (b) of the handle.
Machine Lift Handle. See Figure 9.
The machine lift handle is located on the front of the
machine. Use this handle to lift the machine when
changing the brush. See the section in this Owner's
Manual "Installing or Removing a Brush or Pad
Driver".
Machine Support Leg. See Figure 10.
The machine support leg is located in the front of the
machine under the bumper skirt. Put the machine
support leg down when installing or removing a brush
or pad driver.

How to Install the Squeegee

To install the squeegee, follow this procedure:
1. Attach the squeegee cable to the squeegee lift
arm (a) and squeegee bracket (b). See Figure
#11.
2. Raise the squeegee lift arm.
3. Place the squeegee onto the squeegee
bracket.
4. Push the hair pin through the holes on the
squeegee bracket.
5. Attach the squeegee hose to the hose
connection on top of squeegee. See figure
#12.
Page -10-
a
Figure #8
Figure #9
Figure #10
Figure #11a
Figure #12
CLARKE TECHNOLOGY Operator's Manual -Vision 17E 115V
b
Figure #11b