Machine Controls And Features - Alto Vision V- 00590A Operator's Manual

MACHINE CONTROLS & FEATURES
Squeegee Lift Handle. See Figure #4a & #4b.
The squeegee lift handle is located below the control
handles on the right side. It is used to raise or lower
the squeegee. The vac motor is turned on when the
handle is lowered.
Float Shut Off. See Figure #5.
The shut-off switch for the vac motor is located in the
recovery tank. It automatically turns off the vac
motor when the recovery tank is full.
Parking Brake. See Figure #6a & #6b.
The parking brake prevents movement of the ma-
chine. It is located at the rear lower left side of the
machine. To engage the brake, push the pedal down
(Figure #6a). To release the brake, lift pedal up
(Figure #6b).
CAUTION: Do not activate the brake
while the machine is moving.
Figure #6a.
Page -10-
Figure #4a
Figure #4b.
Figure #5.
Figure #6b.
Clarke Technology Operator's Manual -Vision 21i - Vision V