Timer Function - Baumatic BSIH64-ANZ Instruction Manual

When the "safety shut off" has occurred,
the power indicator of the corresponding
plate will show an
risk. Otherwise, a
Table 1
Power level
selected
0
1
2
3
4
5
6
7
8
9
10 minutes, readjusts to
P
COVERED SENSORS SAFETY
The touch control is equipped with a func-
tion to detect when an object (pan, cloth or
certain liquids) covers the panel sensors
for more than 10 seconds.
This, therefore, prevents the object from
being able to activate or deactivate a plate
without you realising it.
When the touch control detects that an
object is covering the sensors, it starts to
beep until the object covering the control
panel is removed. If the touch control was
on, it automatically shuts off for safety rea-
sons.
If after a few minutes the object covering
the sensors has still not been removed,
the beeping will cease.
Keep in mind that this safety
if there exists a burn
will be shown.
H
0
MAXIMUM
OPERATION TIME
(in hours)
0
8
8
5
4
4
3
2
2
1
function turns on even when the touch
control is off!
Take precaution and do not place
objects on the touch control!

Timer function

(countdown clock)
This function facilitates cooking given that
you don't have to be present: You can set
a timer for a plate, and it will turn off once
the desired time is up.
For these models, you can simultaneously
program each plate for durations ranging
from 1 to 90 minutes.
Setting a timer on a plate
To set a timer on a plate, you should take
the following steps.
9
1 Select the desired plate by directly tou-
ching its corresponding indicator (3) and
choose a power level with the cursor sli-
der (2).
2 The two digits of the timer for the plate
selected will turn on, showing "- - ". You
can set the amount of time desired with
sensors (14) and
3 After a few seconds, the countdown
begins. When there is less than one
minute left, the clock will begin to count
down in seconds.
Once the countdown has finished, the
timed plate will turn off and a series of
beeps will be heard. They can be stopped
by touching either of the sensors
or (15) associated with the
clock.
(15).
(14)
15