Related Manuals for Baumatic BH644TCSS
Summary of Contents for Baumatic BH644TCSS
- Page 1 BH644TCSS/BH645TCSS / BH646TCSS 60 cm Gas hob with thermocouples BH754TCSS/BH755TCSS 70 cm Gas hob with thermocouples...
- Page 2 User Manual for your Baumatic BH644TCSS 60cm 4 burner gas hob with thermocouples BH645TCSS 60cm 4 burner gas hob with thermocouples BH646TCSS 60cm 4 burner gas hob with thermocouples BH754TCSS 70cm 5 burner gas hob with thermocouples BH755TCSS 70cm 5 burner gas hob...
-
Page 3: Table Of Contents
Contents Environmental note Important safety information 5 – 7 Specifications 8 - 13 BH644TCSS/BH646TCSS BH645TCSS BH754TCSS BH755TCSS Electrical details Gas details Gas hob surface layout 12 - 13 Using the gas hob 14 - 16 Before first use The gas hob... -
Page 4: Environmental Note
Environmental note o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the environment. -
Page 5: Important Safety Information
You should not use this appliance to store items on or as a work surface. o No modifications to the appliance are permitted by Baumatic Ltd. o You should not store or place flammable or highly flammable liquids/materials on top of or near the appliance. Items made from aluminium, plastic or plastic film should also be kept away from the appliance, as they may fuse to the surface. - Page 6 Child Safety o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowed to touch the appliance at any time. During and after use, all surfaces will be hot. o If it is necessary for younger family members to be in the kitchen, please ensure that they are kept under close supervision at all times.
- Page 7 If the appliance is being used in a Leisure Accommodation Vehicle, the requirements of N 721 MUST be followed. o Baumatic Ltd. DO NOT recommend that this appliance is installed on any type of marine vessel. Declaration of conformity...
-
Page 8: Specifications
Specifications BH644TCSS/BH646TCSS Product dimensions: Aperture dimensions: Depth: 510 mm Depth: 480 mm Width: 600 mm Width: 560 mm Height: 40 mm Product specifications: o 1 x 3.00 kW rapid burner o 2 x 1.75 kW semi-rapid burners o 1 x 1.00 kW auxiliary burner... -
Page 9: Bh645Tcss
BH645TCSS Product dimensions: Aperture dimensions: Depth: 510 mm Depth: 480 mm Width: 600 mm Width: 560 mm Height: 40 mm Product specifications: o 1 x 3.80 kW triple crown wok burner o 2 x 1.75 kW semi-rapid burners o 1 x 1.00 kW auxiliary burner o Front control operation o Heavy duty cast iron pan stands o Automatic ignition... -
Page 10: Bh754Tcss
BH754TCSS Product dimensions: Aperture dimensions: Depth: 510 mm Depth: 480 mm Width: 700 mm Width: 560 mm Height: 40 mm Product specifications: o 1 x 3.80 kW triple crown wok burner o 1 x 3.00 kW rapid burner o 2 x 1.75 kW semi-rapid burners o 1 x 1.00 kW auxiliary burner o Front control operation o Heavy duty cast iron pan stands... -
Page 11: Bh755Tcss
BH755TCSS Product dimensions: Aperture dimensions: Depth: 510 mm Depth: 480 mm Width: 700 mm Width: 560 mm Height: 40 mm Product specifications: o 1 x 3.80 kW triple crown wok burner o 1 x 3.00 kW rapid burner o 2 x 1.75 kW semi-rapid burners o 1 x 1.00 kW auxiliary burner o Front control operation o Heavy duty cast iron pan stands... -
Page 12: Electrical Details
Model Number ………………………………. Serial Number ………………………………. Date of Purchase ………………………………. Gas hob surface layout BH644TCSS/BH646TCSS A = 3.00 kW rapid burner B = 1.75 kW semi-rapid burners C = 1.00 kW auxiliary burner D = Control panel... - Page 13 BH645TCSS A = 3.80 kW wok burner B = 1.75 KW semi-rapid burners C = 1.00 kW auxiliary burner D = Control panel BH754TCSS A = 3.80 kW wok burner B = 3.00 kW rapid burner C = 1.75 kW semi-rapid burners D = 1.00 kW auxiliary burner...
-
Page 14: Using The Gas Hob
Using the gas hob Before first use IMPORTANT: You should clean the hob surface (see “Cleaning and maintenance” section). The gas hob The following symbols will appear on the control panel, next to each control knob: Black circle: gas off Large flame: maximum setting / ignition point Small flame: minimum setting o The minimum setting is at the end of the anti-clockwise rotation... -
Page 15: Automatic Ignition With Flame Failure Safety Device
Automatic ignition with flame failure safety device The appliance is fitted with a flame failure safety device on each burner, which is designed to stop the flow of gas to the burner head in the event of the flame going out. To ignite a burner: o Press in the control knob of the burner that you wish to light and turn it anti-clockwise to the maximum position. -
Page 16: Cleaning
o Use flat bottomed pans only o When possible, keep a lid on the pan whilst cooking. o Cook vegetables with as little water as possible, to reduce cooking times. IMPORTANT: Always place pans centrally over the hob burners and position them so that the handles cannot get accidentally caught or knocked off. -
Page 17: Cleaning The Hob Burners
Cleaning the hob burners The hob burners should be cleaned once a week or more frequently if they get soiled. o IMPORTANT: Make sure that the hob surface, pan stands and hob burners have cooled before you attempt to touch them. o Remove the hob burners by pulling them upwards and away from the hob top. -
Page 18: Installation
IEE Wiring Regulations o Electricity at Work Regulations BS 6172 o Installation of Domestic Gas Cooking Appliances (if necessary, BS 5482 Installation of Domestic LPG Appliances) o BS 5440 Installation of Flues and Ventilation for Gas Appliances o Baumatic Ltd. Installation Instructions... -
Page 19: Positioning
85°C above the ambient temperature of the room it is located in, during periods of use. * 600 mm (BH644TCSS, BH645TCSS/BH646TCSS) * 700 mm (BH754TCSS, BH755TCSS) o This appliance can be located in a kitchen, a kitchen diner or a bed sitting room. -
Page 20: Unpacking The Appliance
Unpacking the appliance When unpacking the appliance please check that the following items are contained within the packaging: 1 x Baumatic hob Pan stands Burner assemblies Instruction manual Baumatic warranty card Fixing screws Clamps Sealing strip LPG conversion jets Self-adhesive label for amending the gas category on the appliance’s rating plate (required if the LPG conversion jets are used). - Page 21 BH754TCSS BH755TCSS o Cut a hole in the worktop that corresponds with the relevant drawing on the previous page. o IMPORTANT: You must have a gap of at least 25 mm between the underneath of the appliance and any surface that is below it. o Carefully turn the hob upside down and place it on a cushioned mat.
-
Page 22: Gas Connection
Conversion for use on LPG and other gases must only be undertaken by a qualified person. For information on the use of other gases, please contact the Baumatic Advice Line. o The hob must be installed by a qualified person, in accordance... -
Page 23: Ventilation Requirements
Baumatic’s guarantee and lead to prosecution under the regulations quoted above. o In the UK, GASSAFE registered installers are authorised to undertake the installation and service work, in compliance with the above regulations. Ventilation requirements... -
Page 24: Gas Safety (Installation And Use) Regulations
o Remember that the quantity of air necessary for combustion must never be less than 2m³/h for each kW of power (see total power in kW on the appliance rating plate). Gas Safety (Installation and Use) Regulations IMPORTANT: The appliance MUST be connected to the gas supply by use of a 15 mm x ½”... -
Page 25: Gas Adjustment (Conversion To Lpg)
o IMPORTANT: On completion carry out a gas soundness test. Gas adjustment (Conversion to LPG) work must carried GASSAFE registered engineer. IMPORTANT: Always isolate the hob from the electricity supply before changing the injectors and/or adjusting the minimum flow of the burners. o Remove the pan-stands, burners and flame spreaders (A). -
Page 26: Minimum Flow Adjustment For Hob Gas Taps
o IMPORTANT: The minimum flow adjustment process must be completed before the appliance is next used. Minimum flow adjustment for hob gas taps. work must carried GASSAFE registered engineer. IMPORTANT: Always isolate the hob from the electricity supply before changing the injectors and/or adjusting the minimum flow of the burners. -
Page 27: Gas Tap Maintenance
Gas tap maintenance These maintenance operations MUST ONLY be carried out by a GASSAFE registered engineer. IMPORTANT: Before carrying out any maintenance operations, disconnect the appliance from the gas and electricity supplies. If a gas tap becomes stiff to operate, then you should proceed as follows: o Remove the control knobs, pan supports, burners, hob fixing screws and clamps. -
Page 28: Electrical Connection
Replacing the mains supply cable If the mains supply cable is damaged, then it must be replaced by an appropriate replacement which can be obtained from the Baumatic Spares Department. The mains supply cable should be replaced in accordance with the following instructions: o Switch the appliance off at your mains supply. -
Page 29: My Appliance Isn't Working Correctly
Or any installation other than the one specified by Baumatic Ltd. has been completed. Please refer to the conditions of guarantee that appear on the warranty card that you receive with the appliance. -
Page 30: Baumatic Consumables
BC005 Stainless Steel Cleaner and Protector (250ml) o BC007 E-Cloth – General Purpose Cloth o BC008 Microwave Cover To order a Baumatic consumable product please call 0123 5437 244 and quote the product code. You can also order online from eshop.baumatic.co.uk... -
Page 31: Contact Details
United Kingdom Baumatic Ltd., Czech Republic Baumatic Buildings, Baumatic CR s.r.o. 6 Bennet Road, Lípová 665 Reading, Berkshire 460 01 Liberec 4 RG2 0QX Czech Republic United Kingdom +420 483 577 200 Sales Telephone (0118) 933 6900 www.baumatic.cz Sales Fax...