Soyo Combo Setup - SOYO SY-KT400 Dragon Ultra User Manual

BIOS Setup Utility

3-1 SOYO COMBO SETUP

This motherboard does not use any hardware jumpers to set the CPU
frequency. Instead, CPU settings are software configurable with the BIOS
[SOYO COMBO SETUP].
After the hardware installation is complete, turn the power switch on, then
press the <DEL> key during the system diagnostic checks to enter the
Award BIOS Setup program. The CMOS SETUP UTILITY will display on
screen. Then, select the [SOYO COMBO SETUP] option from the main
menu and press the <Enter> key.
System Performance
CPU Frequency Mode
x Frequency 1MHz Stepping
x CPU To PCI Divider
x DRAM:AGP:PCI Clock
DRAM Clock
CPU Ratio Select
CPU Voltage Select
DDR (2.5V) Voltage Select
AGP (1.5V) Voltage Select
Advanced Tune-up Settings
C.I.H. 4-WAY Protection
Onboard 6Ch H/W Audio
Onboard IDE RAID
OnChip LAN
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
RAID/ATA & SCSI Boot Order
Move Enter:Select
F5:Previous Values
Phoenix – Award BIOS CMOS Setup Utility
SOYO COMBO Feature
Normal
Auto
100
/3
SPD: 66: 33
133
Auto
Default
Default
Default
Press Enter
Disabled
Enabled
Enabled
Enabled
Enabled
Floppy
HDD-0
LS120
Enabled
RAID/ATA, SCSI
+/-/PU/PD:Value
F6:Fail-Safe Defaults
SY-KT400 DRAGON Ultra
Menu Level
F10:Save ESC:Exit
47
Item Help
F1:General Help
F7: Optimized Defaults