BIOS Setup Utility
3-1 SOYO COMBO SETUP
This Motherboard does not use any hardware jumpers to set the CPU
frequency. Instead, CPU settings are software configurable with the BIOS
[SOYO COMBO SETUP].
After the hardware installation is complete, turn the power switch on, then
press the <DEL> key during the system diagnostic checks to enter the
Award BIOS Setup program. The CMOS SETUP UTILITY will display
on screen. Then, select the [SOYO COMBO SETUP] option from the
main menu and press the <Enter> key.
CPU Name
: Pentium II,
CPU Frequency (MHz)
CPU Host/PCI Clock
CPU Ratio
AGP Clock
Vcore Voltage Adjust
Boot Sequence
Processor Number Feature
CPU L2 Cache ECC Checking
CPU L2 Latency Adjust
Quick Power On Self Test
POWER ON Function
Soft – Off by PWR-BTTN
Power-On by Ring/LAN
Resume by Alarm
The [SOYO COMBO SETUP] menu combines the main parameters that
you need to configure, all in one menu, for a quick setup in BIOS.
ROM PCI/ISA BIOS
SOYO COMBO SETUP
AWARD SOFTWARE, INC.
CPU ID
: 0665
: Manual
: 100/33 MHz
: X 3.5 = 350MHz
: = 66MHz
: Normal
: A,C,SCSI
: Enabled
: Enabled
: Def 02
: Enabled
: BUTTYON ONLY
: Instant-Off
: Enabled
: Disabled
57
CPU Warning Temperature
Current System Temp.
Current CPU Dio Temp.
Current CPUFAN Speed
Current PWRFAN Speed
Current CHAFAN Speed
Vcore
:
1.98 V
3.3 (V)
:
3.55 V
+12 (V)
:
11.97 V
- 5 (V)
:
- 0.02 V
5VSB(V)
:
5.02 V
CPUFAN Off In Suspend
C.I.H. 4-WAY Protection
ESC
: Quit
F1
: Help
F5
: Old Values
F7
: Load Setup Defaults
SY-6BA+100
: Disabled
: 26 ½ C / 78 ½ F
: 28 ½ C / 82 ½ F
: 5433 RPM
:
0 RPM
:
0 RPM
VTT (V)
:
+ 5 (V)
:
-12 (V)
:
VBAT(V)
:
: Enabled
: Enabled
↑ ↓ → ←
: Select Item:
PU / PD / + / -
: Modify
(Shift) F2
: Color
1.50 V
4.94 V
-12.04 V
3.07 V