Table of Contents
Advertisement
Highpoint HPT372 Driver Installation
Installing Driver During OS Installation
Install driver during Windows NT4.0 installation
1. Go to "d:\raid\hpt372_234\" directory, (assuming that
your CD-ROM is drive d) copy all the files and
directory to a floppy disk.
2. Press
inspecting your computer's hardware configuration.
3. Press
installation program will remind user to press
specify other devices. Please press
4. In the follow-up
then press
5. The installation program will prompt users to insert the
floppy disk of driver. Please insert it and then press
to confirm.
6. In
the
UDMA/ATA RAID
confirm.
7. The follow-on interface will list the devices to be installed,
in which
item should be included. (If users want to install other
devices, please operate at this time. If all devices have
been successfully installed, please go to next.)
8. Press
F6
key when the system prompts
F6
key, the installation will continue. Later,
Device Type
Enter
to confirm.
follow-on
window,
Controller, then press
HPT370/HPT372 UDMA/ATA RAID Controller
Enter
to continue the installation of Windows NT4.0.
SY-KT400 DRAGON Ultra
S
window, select
select
102
Setup is
S
key to
key.
Other
item,
Enter
HPT370/HPT372
Enter
to
Hide quick links:
Advertisement
Table of Contents
