Quick Bios Setup - SOYO SY-KT400 Dragon Ultra User Manual

Hardware Installation
Repeat this operation until you get the following screen.
4. The BIOS Setup screen appears:
SOYO COMBO Feature
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
Esc : Quit
F10 : Save & Exit Setup

2-3 QUICK BIOS SETUP

This motherboard does not use any hardware jumpers to set the CPU frequency.
Instead, CPU settings are software configurable with the BIOS [SOYO
COMBO FEATURE]. The [SOYO COMBO FEATURE] combines the main
parameters that you need to configure, all in one menu, for a quick setup in
BIOS.
After the hardware installation is completed, turn the power switch on,
then press the <DEL> key during the system diagnostic checks to enter
the Award BIOS Setup program. The CMOS SETUP UTILITY will be
shown on the screen. Follow these steps to configure the CPU settings.
Phoenix – Award BIOS CMOS Setup Utility
Change CPU's Clock & Voltage
SY-KT400 DRAGON Ultra
PC Health Status
Load Optimized Defaults
Load Fail - Safe Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
: Select Item
38