Superio Device - SOYO SY-KT400 Dragon Ultra User Manual

BIOS Setup Utility

3-5.2 SuperIO Device

Caution: Change these settings only if you are already familiar
with the Chipset.
The [SuperIO Device] option changes the values of the chipset registers.
These registers control the system options in the computer.
The following screen shows setup default settings.
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART Mode Select
x UR2 Duplex Mode
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
:Move Enter:Select
F5:Previous Values
After you have completed the changes, press [Esc] and follow the
instructions on your screen to save your settings or exit without saving.
SuperIO Device
Onboard FDC
controller
Phoenix – Award BIOS CMOS Setup Utility
SuperIO Device
Enabled
3F8/IRQ4
2F8/IRQ3
Normal
Half
378/IRQ7
SPP
3
+/-/PU/PD:Value
F6:Fail-Safe Defaults
Setting
Disabled
Enabled
SY-KT400 DRAGON Ultra
Menu Level
F10:Save ESC:Exit
Description
Turn off the on-board
floppy controller
Use the on-board floppy
controller
72
Item Help
F1:General Help
F7: Optimized Defaults
Note
Default