SOYO SY-KT400 Dragon Ultra User Manual page 109

Highpoint HPT372 Driver Installation
Install driver during Windows XP installation
1. Go to "d:\raid\\hpt372_234\" directory, (assuming that
your CD-ROM is drive d) copy all the files and directory
to a floppy disk.
2. Booting from CD-ROM, when the
screen appear and prompt user to press F6 key to install
third party SCSI or RAID driver, please press F6 Key.
3. Press
Windows XP Setup
4. The system will ask whether to install driver under
under Windows
Windows XP.
5. Insert the floppy disk of driver, then press
6. In the follow-on window of device type, please select
HPT370/HPT372
Windows XP
7. Win XP will prompt you that a message that the driver is
newer than the default driver, press S to continue.
8. The follow-on interface will list the devices to be installed, in
which HPT370/ HPT372 UDMA/ATA RAID Controller
should be included. (If users want to install other devices,
please operate at this time. If all devices have been
successfully installed, please go to next.)
9. Press ENTER to continue Windows XP setup.
S key to specify additional devices when the
window appears.
XP, please select to install driver under
UDMA/ATA
to continue.
SY-KT400 DRAGON Ultra
Windows XP Setup
RAID
104
blue
WinNT
Enter to continue.
Controller for
item
or