SOYO SY-KT400 Dragon Ultra User Manual page 32

Hardware Installation
5. Universal Serial Bus (USB1/USB2, USB20_1/USB20_2)
This motherboard provides 6 USB ports for your additional devices. Plug the
USB device jack into the available USB connector USB1 or USB2.
USB20_1 and USB20_2 are available. To make use of these USB ports,
purchase a USB cable from your dealer. The lay-out of USB20_1, USB20_2 are
as follows:
USB1, USB2, USB20_1 and USB20_2 supports USB 2.0 devices.
6. Onboard Game port/audio
This motherboard provides Joystick port and audio.
- Attach the joystick cable to the 15-pin GAME port at the rear panel of you
motherboard.
- This motherboard features three built-in audio-stereo ports (labeled
line-out, line-in, and mic jack) convenient to directly plug-in all your
external audio devices.
2-channel Speaker System
When using 2-channel speaker, connect the speaker cable to line-out.
4-channel Speaker System
If you're using 4-channel speaker, connect the front L/R speakers to line-out and
rear L/R speakers to Line-in. make sure to set the audio software for 4-channel
speaker system.
10
GND
GND
9
(+)Data
8
(-)Data
7
Power
6
27
SY-KT400 DRAGON Ultra
4 GND
(+)Data
3
(-)Data
2
Power
1