SOYO SY-KT400 Dragon Ultra User Manual page 34

Hardware Installation
2. Standard Infrared (SIRCON)
Plug the 5-pin infrared device cable to the SIRCON header.
This will enable the infrared transfer function. This motherboard meets both the
ASKIR and HPSIR specifications.
Please install according to the following pin assignment:
Wake-On-LAN
JP44 Pin Assignment
3 MP-Wake-Up
2 GND
1 5VSB
Standard Infrared
(SIRCON) Connector
SIRCON Pin Assignment
1 2 3 4 5
VCC
IRRX
GND
29
SY-KT400 DRAGON Ultra
IRTX