SOYO SY-KT400 Dragon Ultra User Manual page 47

Hardware Installation
DRAM clock select
DRAM clock can be set either "By SPD" (Serial Present Detect), which
means the BIOS will pick up the preprogrammed module setting or User can
manually pick. Bear in mind that the Dram clock can only be equal or higher
than the CPU FSB setting.
System Performance
CPU Frequency Mode
Frequency 1MHz Stepping
CPU To PCI Divider
DRAM:AGP:PCI Clock
DRAM Clock
CPU Ratio Select
CPU Voltage Select
DDR (2.5V) Voltage Select
AGP (1.5V) Voltage Select
Advanced Tune-up Settings
C.I.H. 4-WAY Protection
Onboard 6Ch H/W Audio
Once the above settings are set, the rest of the settings are pretty much
straight forward. To prevent your components from permanently damage,
please refer to the manufacturer spec of the components that you used. Some
components have better tolerances than the other.
Phoenix – Award BIOS CMOS Setup Utility
SOYO COMBO Feature
Normal
Manual
100
/3
SPD: 66: 33
133
Auto
Default
Default
Default
Press Enter
Disabled
Enabled
SY-KT400 DRAGON Ultra
Menu Level
42
Item Help