Samsung SVM 400 User Manual page 33

Telephone system

Hide thumbs Also See for SVM 400:

Table of Contents

Type (V-Voice)

Message Status (Saved, New)

Filename

MONIT [ALL, OFF, or PORT NO.] Turns on/off monitor function for all or specific ports. Must be turned off

with "OFF" command—not done by maintenance. May be used in combination with "CP" command or

alone.

RX or RECEIVE [Filespec] {where filespec is any valid path and filename} Used with CCTICOM utility

to receive a file from the remote PC.

SHELL [any valid DOS command] Shells out to DOS command screen, executes any valid DOS com-

mand. Returns to Calais Port Activity screen upon completion of command. If no command is given, remains

at DOS command prompt until user types "Exit" to retun to Activity screen.

STATUS Displays system information including: Mode and "status number" for all ports, total number of

blocks in the system, available RAM, current (or highest) message index value, minutes of remaining mes-

sage space available, current message partition in use, and status of RMATS terminal (active/idle).

STOP [PORT NO.]

Stops and reinitializes specified port.

Will disconnect any call in progress on that port.

Immediately places port back in service when initialization is complete.

Must be executed on individual ports only.

PORT ACTIVITY FACILITY HELP There are two pages of help screens immediately available to the System

Administrator. To access the help screens, press F1 to bring up the first page of help and page up or down to

move between the two pages. The help screens provide information on commands to control and monitor

Calais' ports. To execute a command, type the command and arguments at the command line prompt =>

and then press ENTER. To exit the facility and return to the System Main Menu, press F9.

You may be asked to access this screen by Samsung Technical Support.

SVM 400 Technical Manual Page 32

HOME

PAGE

Table of

Contents

Table of Contents