Advertisement
Diagnostics
The Diagnostics page is used to configure the SMS diagnostics and command execution configuration. This enables you to change
the configuration, perform functions remotely and check on the status of the router via SMS commands.
To access the Diagnostics page, click on the Services menu item then select the SMS menu on the left and finally select
Diagnostics beneath it.
SMS Diagnostics and Command Execution Configuration
The options on this page are described below.
Enable Remote Diagnostics
Enables or disables the remote diagnostics feature. If this setting is enabled all incoming text messages are parsed and tested for
remote diagnostics commands.
If remote diagnostics commands are found, the router executes those commands. This feature is enabled by default. All remote
diagnostic commands that are received are stored in the Inbox.
Note: It is possible to adjust settings and prevent your router from functioning correctly using remote diagnostics. If this
occurs, you will need to perform a factory reset in order to restore normal operation.
We highly recommended that you use the white list and a password when utilising this feature to prevent unauthorised
access. See the
White list
M2M CDMA Router – SMS Tools User Guide
8
Figure 5 - SMS diagnostics and command execution configuration
description for more information.
www.netcommwireless.com
Advertisement
