Gree GA Series Product Data page 7

PRODUCT OVERVIEW (GA Series)
This section summarizes product features covered in detail in later sections of this manual.
WIRE SCREEN
DISCHARGE
GRILLE
INDOOR-AIR
FILTERS
FRONT
PANEL
• Accessory Power Cord or Hardwire Kit
(required) - - Select correct power cord or
hardwire kit to match voltage and amperage of
electrical circuit.
• Polymer, Metal or Extended Wall Sleeve - -
Designed for rugged duty, acoustic absorption,
and attractive appearance for years to come.
• Rotary Compressors - - Provide quiet, reliable
operation.
• Copper Tube Aluminum Fin Coils - - Enhanced
coils provide durability, high performance, and
ease of operation.
• Fresh Air Control Arm - - Allows outdoor air into
room through vent filter for improved air quality.
• Control Door - - Provides protection for controls
and enhances appearance.
• Condensate Removal - - Minimizes condensate
water on outside of building.
MOLDED
CONDENSER
SHROUD
CONFIGURATION
DIP SWITCHES
INDOOR
WALL THERMOSTAT
COIL
AND ENERGY MANAGEMENT
INTERFACE
Accessory Power Cord
• Two- -Piece Filter Design - - Provides improved air
filtration and can be removed easily for cleaning.
• Louvered Front Panel - - Made of high impact
polystyrene. Provides improved performance and
quiet operation.
• Digital Control Pad with Electronic Display - -
Easy to select: mode, fan speed and set point with
an easy to read electronic display. In ˚ F or ˚ C.
• Configuration Dip Switches - - Setup the system
perfect for the exact application.
• Wall Thermostat Interface - - A terminal block
for wiring up a wall thermostat that is easy to wire
to and is easy to remove.
• EM (Energy Management) Interface - - A plug
for connecting to an Energy Management system or
Front Desk Control. Easy to wire to and easy to
remove.
7
COIL TUBE
SHEETS
BASEPAN
ACCESSORY
DIGITAL CONTROL PAD
W/ELECTRONIC DISPLAY
ACCESSORY
OUTDOOR
GRILLE
WALL
SLEEVE