Folding / Unfolding The Buggy - MGI Ryder R75 Instructions/Service Manual

8. Folding/unfolding your buggy
Practice unfolding and folding the buggy using the steps below. This means when you go
to play golf you will be somewhat familiar with this task.
1. Press the red height adjusting button located halfway down the handle [Diagram
1]
2. Lift the handle gently and at the same time turn the lower release button on front
wheel assembly anti-clockwise [Diagram 2]
3. Lift the main handle up completely. Both the top handle and the lower handle will
click into place. Now lift the top bag support up until it clicks into place also
4. The top handle has two positions. Adjust to suit your requirements by pressing
the red height adjusting button
5. Slide seat into the bracket on the right side of the buggy [Diagram 3]
6. Slide sand bucket loop into the bracket on the left side of the buggy. Use the
screw to secure the sand bucket loop [Diagram 4]
MOST IMPORTANT: DEPRESS THE SEAT WITH YOUR HAND BEFORE SITTING.
DO NOT USE THE SEAT ON UNEVEN SURFACES.
*MGI does not warrant any seat support brackets that are damaged or bent.
1
3
9
2
4