Clutches; Upper & Lower Bag Straps; Correcting The Alignment Of Your Buggy - MGI Ryder R75 Instructions/Service Manual

Motorised buggy
Table of Contents

Advertisement

11. Clutches [See Maintenance Schedule]
The rear wheel clutches located in the wheel, need to be checked to confirm they
function correctly and should be replaced as per the Service Schedule. Try and turn the
Right Hand clutch/wheel in an anti clock wise direction – if you cannot it is functioning
correctly. Try and turn the Left Hand clutch/wheel in a clock wise direction – if you
cannot it is functioning correctly.
12. Upper & Lower Bag Straps [See Maintenance Schedule]
The bag straps should be replaced as per the Service Schedule. The upper bag strap
can be replaced by:
1. Removing the left and right hand straps form the upper bag support
2. Undo and remove the screws holding the strap in position on the bag support
3. Remove and replace both bag straps
4. Insert bag strap securing screws
13. Correcting the Alignment of your Motorised Buggy
If during use, you find that the buggy veers to the right or left, please follow the
instructions below to correct this problem:
1. If the buggy veers to the left, face the front wheel of the buggy and use the Allen
key provided to screw the right bolt clockwise or the left bolt anti-clockwise.
2. If the buggy veers to the right, face the front wheel of the buggy and use the
Allen key provided to screw the left bolt clockwise or the right bolt anti clockwise.
Test run the buggy and repeat the process until the buggy runs straight.
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hunter r200

Table of Contents