Blackmagicdesign Teranex 2D Processor Installation And Operation Manual page 51

Understanding the LCD Menus
51
CC Enable
The CC Enable menu allows you to turn closed captioning ON or OFF in the output video of the Processor.
Disabling the captions may be helpful if the incoming closed caption data is incorrect or corrupt.
‚ The default setting for this menu is Off.
Closed
Video Main Menu Setup Ancillary Data
Caption
Noise
Timecode
Reduction
Ancillary Video
Data Index
Back
Main Menu Ancillary Data
1 2
Analog In Line
The Analog In Line selection is used to identify the line on which closed caption information will be
located in the incoming video. This menu applies only to sources with analog closed captions. If your
captions are digital, they will be automatically detected.
‚ The range of adjustment is lines 20 to 22.
‚ The default setting is line 21.
Closed
Video Main Menu Setup Ancillary Data
Caption
Noise
Timecode
Reduction
Ancillary Video
Data Index
Back
Main Menu Ancillary Data
1 2
CC Service 1
Closed Caption
Enable Language
Off
Analog Service 2
In Line Language
On
Analog
Out Line
Service 2
Back Back
Source
Closed Caption /
3
CC Enable
CC Service 1
Set Value
Enable Language
Analog Service 2
In Line Language
21
Analog
Out Line
Service 2
Back Back
Source
Closed Caption /
3
Analog In Line