Unpacking - Bose CINEMATE 1 SR Setup Manual

WELCOME
Source connections to your TV
Please be sure that all your sources, such as a cable/satellite set-top box or a DVD
player, have both a video and an audio connection to your TV.
• If you are connecting a source to your TV using an HDMI
TM
cable, there is no need for
additional connections. The HDMI
TM
cable carries audio and video information.
• If you are connecting a source to your TV with something other than an HDMI cable,
such as a yellow composite video cable, you will need to make an analog audio
connection to your TV in order to hear the sound from that source on your CineMate
system. Analog audio cables are readily available at electronics stores. Please consult
your TV owner's manual for more information on connecting sources to it.
Unpacking
As you carefully unpack the carton, if any part appears damaged, do not attempt to
use it. Notify Bose or your authorized Bose dealer immediately. For Bose contact
information, refer to the address sheet included in the carton.
Be sure to save all of the packing materials. These provide the safest means for any
necessary shipping or transporting.
Carton contents:
• Speaker array
• Acoustimass _ module
• Accessory kits
Each kit is identified by an icon on the box. The icons appear in the system setup steps
to indicate where parts are located.
Cables and pow_
cords kit
Optical digital cable
(2)USA; (1)EU
Coaxial digital cable
(1)USA; (2)EU
Stereo audio Power cords*
cable
*The appropriate power cords for your region are supplied.
Engfish - 7