Bose Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC and all other applicable EU directive requirements. The complete declaration of conformity can be found at: www.Bose.com/compliance.
Contents Introduction Thank You ........................................4 Unpacking the carton ....................................4 Setting Up Placing your speakers to achieve realistic home theater sound ......................5 Front left and right speakers ................................6 Center speakers ..................................... 6 Rear speakers ......................................6 Powered Acoustimass module ................................
Introduction Thank You We appreciate your choice of the Bose Acoustimass 6 series V or Acoustimass 10 series V home theater speaker system. ® ® The Acoustimass 6 features five small cube speakers, while the Acoustimass 10 system features four cube speaker arrays and a center front speaker.
Setting Up Placing your speakers to achieve realistic home theater sound Keep these guidelines in mind when choosing a location for each speaker: • The Acoustimass module should be at least 2 feet (.6 m) from your TV set to prevent interference. ®...
Setting Up Front left and right speakers The goal for these is to create a sound image wider than the screen that seems natural to viewers sitting anywhere in the room. • Place these two front speakers on either side of your TV. •...
LR for the speaker at the left rear R for the speaker at the right front RR for the speaker at the right rear C for the speaker at the center front Acoustimass 6 series V system Acoustimass 10 series V system English - 7...
Setting Up Connecting the Acoustimass module to the receiver ® CAUTION: Before making these connections, turn off your receiver to prevent unwanted noises when you plug the Acoustimass ® module into it. The system input cable is 20 feet (6.1 m) long and connects to your surround receiver. Unlike the speaker cables, this input cable has a multi-pin connector that inserts into the Audio Input connector on the module.
When all the connections check out, plug the power cord from the Acoustimass module into an AC (mains) outlet. Plug in the receiver also. Note: Bose recommends using a quality surge suppressor on all electronics equipment. Voltage variations and spikes can damage electronic components in any system. Using a high-quality suppressor (available at electronics stores) can eliminate the vast majority of failures caused by a power surge.
Using Your System Getting the most from your home theater speakers With system connections completed and the module plugged in, your Acoustimass system is now ready for use. ® Familiarize yourself with the controls and built-in protections that adjust the audio of this system. They offer options to suit your particular style of use and preferences.
Using Your System Setting your digital surround sound receiver Speakers in your Acoustimass 6 series V or Acoustimass 10 series V system are fully compatible with the audio output of digital ® surround receivers. The system’s integrated signal processing supports full low-frequency reproduction from all channels. To gain complete advantage of these system capabilities, you may want to adjust some settings on your receiver.
If you still have ® a problem, contact your Bose dealer to arrange for service. To contact Bose directly, refer to the contact sheet in the carton. ® Problem...
Details of the warranty are provided on the warranty card that came ® with your system. Please fill out the information section on the card and mail it to Bose. Failure to do so, however, does not affect your rights.
Need help?
Do you have a question about the Acoustimass 6 series V and is the answer not in the manual?
Questions and answers