Bose CINEMATE 1 SR Setup Manual page 15

SYSTEM SETUP
Step 6: Set up the A¢oustimass motule
What you need for this step:
t
t
t
t
t
t
t
t
A ¸
Acoustimass module Rubber feet Power cord
CAUTION: Choose a stable and level surface for the Acoustimass module. Vibration can
cause the speaker to move, particularly on smooth surfaces like marble, glass, or highly
polished wood.
A. When placing the Acoustimass ® module on bare floors, or other smooth surfaces,
attach the included rubber feet to the bottom of the module for greater stability and
to protect your floor.
-_ Rubber foot
@ Bottom of module
B. Plug the small end of the power cord into the connector labeled Power.
use only
control knob
--For service use only
C. Make sure the bass control knob is set to the middle of the range.
English - 15