Bose CINEMATE 1 SR Setup Manual page 10

SYSTEM SETUP
B. Plug one end of the selected audio cable into the corresponding audio output
connector on your TV.
Note: If you are using an optical cab/e, be sure to remove the protective cover from the
plug. When inserting the plug into the connector, make sure it is pushed in a// the way.
You may sense a slight resistance before you fee/it crick into p/ace.
C. Lay the speaker array grille-side down on the table in front of your TV and locate the
TV input connections.
Note: To protect the surface of your table you may want to temporarily put a protective
cloth under the speaker array, The foam bag removed from the speaker array could be
used for this purpose.
Note: Be sure to remove a// protective films from the speaker array before operating the
system. These may affect acoustic performance if/eft in p/ace.
TV Input
D=
Optical
Digital
audio
Coaxial R -- L
Digital Analog
audio audio
Plug the other end of the selected audio cable coming from the TV into the
corresponding connector on the speaker array.
10 - English