Bose CINEMATE 1 SR Setup Manual page 38

SYSTEM SETUP
.&. Point the remote at the speaker array and press the system power button.
B.
Check that the power indicator on the speaker array is on (white), indicating the
system is on, and that the status indicator is off.
Status _] [_ Power
C.
Put the ADAPTiQ ®headset on your head making sure
the left and right sensors rest above your ears.
During the audio calibration the headset allows the
CineMate ®1 SR system to hear exactly what you
hear.
Sensor
I:1, Slide the ADAPTiQ connector cover off the end of the speaker array.
ADAPTiQ button headset connector
E.
I
I
, i
ADAPTiQ connector cover
Insert ®
the ADAPTiQ headset cable into the ADAPTiQ headset connector until it is
fully seated.
The status indicator on the speaker array will glow green and the ADAPTiQ
calibration system will start automatically.
18 - English