First Time Startup; Step 1: Install The Remote Batteries - Bose CINEMATE 1 SR Setup Manual

SYSTEM SETUP
First time startup
Step 1: install the remote batteries
What you need for this step:
Remote control
(2) AA (IEC LR6)
batteries
A, Slide the battery cover off the back of the remote control.
AA (IEC LR6)_
batteries (2) ]
Battery cover
B. Install the two provided AA (IEC LR6) batteries, matching the plus and minus ends
of the batteries to the polarity markings inside the battery compartment.
C. Slide the battery cover on until it snaps into place.
Step 2: Run the ADAPTiQ ° caJibratiOno
What you need for this step:
Remote control
ADAPTiQ ® audio calibration headset
The ADAPTiQ ®audio calibration system customizes the sound of your system to the
acoustics of your listening area. To perform a calibration you need about 10 minutes
when the room is quiet. While wearing the special headset, the system will ask you to
place yourself in five different locations (sitting or standing) in your listening area as the
system takes measurements in each. Audio prompts from the system will guide you
through the process.
English - 17