Bose CINEMATE 1 SR Setup Manual page 29

SYSTEM SETUP
Putting the system together
Note: The CineMate ® 1 SR system uses the reflective surfaces of your room to deliver wide,
spacious sound. For best sound quality, the speaker array should not be placed inside a
cabinet, or diagonally in a comer.
Note: To avoid wireless interference, keep other wireless equipment, such as wireless
computer network touters, cordless phones, microwave ovens, or other WlFI-enabled
audio/video devices away from the speaker array and Acoustimass ®module.
Step 1: Connect TV audio to the speaker array
What you need for this step:
Speaker array
Optical Coaxial Analog
digital digital stereo
A, Check the audio outputs on your TV and choose the type of connection you want to
make. A digital audio connection is recommended using an optical or coaxial digital
audio cable.
13/
L®
"®
II
®
Q
Analog stereo audio - The most common type of audio connection
where the left and right channel are connected separately.
Optical digital audio (recommended) - A digital audio connection
that passes digital data in the form of pulsating light through a fiber
optic cable.
Coaxial digital audio (recommended) - A digital audio connection
that passes digital data through a 75-ohm coaxial cable.
Engfish - 9