Change The Admin Password - Avaya IP Ofice IP50 V2 Quick Installation Manual

Table of Contents

Advertisement

2.6 Change the Admin Password

This password controls access to the system using the IP Office Manager PC application. To change this password from a
phone can only be done using extension 10 or 11.
Change remote administration password from an ETR 18D/34D phone
1. At a system administration extension (10 and 11); with the phone idle press Feature 0 0 followed by two presses
of Intercom 1. System Administration: is shown on the display.
2. Dial #730.
3. If a
system password
password.
4. The current password (default for new systems is Administrator) is displayed.
5. Enter or change the password.
· Enter a character by pressing the indicated button until that character is displayed. If you pause more than 1
second after press a button, the cursor will move onto the next space.
1
1!"$%&'()+,-./
4
7
*
*:;<=>?@[\]^_`
6. To save the password, press Enter. The bottom line of the display shows the password as it has been entered.
7. Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then place
it back in the cradle.
Change remote administration password from a 1408/1416 phone
1. At either of the system administration telephones (extensions 10 and 11), with the phone idle press Admin.
2. Use the
up or down
Select.
3. Dial #730.
4. If a
system password
proceed.
5. The display will show Remote password:.
· Enter a character by pressing the indicated button until that character is displayed. If you pause more than 1
second after press a button, the cursor will move onto the next space.
1
1!"$%&'()+,-./
4
7
*
*:;<=>?@[\]^_`
4. Use the dial pad to enter an password of up to 8 characters. When completed press Enter. To remove the
characters entered so far press Clear.
5. Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.
PARTNER Version Quick Installation Guide
IP Office Essential Edition
has been set, the prompt Enter Sys Password: is displayed. Enter the four digit system
22
4ghiGHI
7pqrsPQRS
arrow buttons to scroll the display to System Administration. When displayed, press
has been set for the system, you will be prompted to enter that password before you can
22
4ghiGHI
7pqrsPQRS
2
2abcABC
5
5jklJKL
8
8tuvTUV
0
0Space
2
2abcABC
5
5jklJKL
8
8tuvTUV
0
0Space
Installation: Set the System Password
3
3defDEF
6
6mnoMNO
9
9wxyzWXYZ
#
#
3
3defDEF
6
6mnoMNO
9
9wxyzWXYZ
#
#
- Issue 1b (09 April 2010)
Page 23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ip office essential edition partner version

Table of Contents