Download  Print this page

T2 Roller Holder Assy - Brother HL-5440D Service Manual

Brother laser printer.
Hide thumbs

Advertisement

10.2 T2 roller holder ASSY

(1) Push the T2 lift arm in the direction of arrow 1a, and remove the boss on the T2 roller
holder ASSY from the T2 lift arm. Then turn the T2 roller holder ASSY in the direction of
arrow 1b.
T2 lift arm
(2) Slide the T2 roller holder ASSY in the direction of arrow 2 to remove it from the T2
separation roller shaft.
(3) Lift the right side of the T2 roller holder ASSY in the direction of arrow 3a, and pull the T2
roller holder ASSY in the direction of arrow 3b to remove it from the LT unit.
"A"
Assembling Note:
• When attaching the T2 roller holder ASSY, engage "A" on the shaft of the T2 roller
holder ASSY with the hole on the T2 feed frame ASSY, and insert the shaft into the hole.
1a
1b
Fig. 3-80
T2 feed frame ASSY
Fig. 3-81
Boss
T2 roller holder ASSY
3a
3b
2
T2 separation roller shaft
3-78
T2 roller holder ASSY
LT unit
Confidential

Advertisement

Table of Contents

   Related Manuals for Brother HL-5440D

Comments to this Manuals

Symbols: 0
Latest comments: