Reset Periodic Replacement Parts (LCD model only)
This function is used to reset the corresponding counter after a periodic replacement part has
been replaced correctly or to reset an error caused due to a consumable part being replaced
by the user via an incorrect procedure.
(1) Press the [Go] and [
"Drum Unit" is displayed on the LCD.
(2) Press the [
counter is to be reset, and press the [OK] button. "
(3) Press the [
the ready state.
The counters of the following periodic replacement parts can be reset:
• MP paper feeding kit
• Paper feeding kit 1
• Paper feeding kit 2
• Fuser unit
• Laser unit
Delete User Setting Information (LCD model only)
All of the user setting information can be deleted using the procedure shown below.
(1) While the machine is in the ready state, press the [
Menu" on the LCD, and press the [OK] button.
(2) Press the [Cancel] and [
(3) Press the [OK] button, and "Restart Printer?" is displayed on the LCD. Press the [OK]
button again, and "Please wait" is displayed on the LCD. When completed, the machine
returns to the ready mode.
] buttons simultaneously while the machine is in the ready state.
] or [
] button to display the periodic replacement part for which the
] button. "Accepted" is displayed on the LCD and the machine returns to
] buttons simultaneously. "Setting Reset" is displayed on the
] or [
Exit" is displayed on the
] button to display "Reset