Dynamic Dns Settings - Teltonika RUT104 User Manual

Encryption. Choose the authentication method for wireless network:
No Encryption. It will let anyone within range and with the proper equipment to connect
onto your network within the router operating range.
WEP Open System – choose the 64 bit WEP security with one of four pre-shared keys.
WEP Shared Key– choose the 128 bit WEP security with one of four pre-shared keys.
WPA-PSK – choose the WPA security with pre-shared key.
WPA2-PSK – choose the WPA2 security with pre-shared key.
WPA-PSK/WPA2-PSK Mixed mode – choose for the coexistence of WPA and WPA2
clients in.
WPA-EAP – choose to enable the certificate based authentication.
WPA2-EAP – choose to enable the certificate based authentication.
Cipher. Choose the encryption method:
Auto. Encryption method is chosen by device.
Force CCMP (AES). Encryption by the AES algorithm.
Force TKIP. Encryption by the TKIP (Temporal Key Integrity Protocol) algorithm.
Note: Setting a lower fragmentation threshold value can help improve connection reliability in
noisy environments (where radio interference is present). This mechanism does add overhead and
therefore reduces effective throughput.
Note: Setting a lower RTS threshold value can improve connection reliability and throughput
in crowded wireless LAN environments (where many clients are trying to communicate
simultaneously). It adds a certain amount of overhead, but can compensate for this by reducing
bandwidth lost due to collisions.
4.6.4

Dynamic DNS Settings

Dynamic DNS (DDNS) is a domain name service allowing to link dynamic IP addresses to
static hostname. To start using this feature firstly you should register to DDNS service provider.
Enable Dynamic DNS – check the box to enable DDNS.
User name - enter your user name. The router will use it to automatically login to update your
IP address in the DDNS server.
Password – enter you login password.
Hostname - enter your hostname which was registered in DDSN server.
Update period – enter IP address update time in seconds.
DynDNS service type – DYNDNS service type. Allowed are all DynDNS service types
Figure 13. Dynamic DNS Settings.
18 | P a g e